GumStix BSP for Windows Embedded CE 5.0/6.0 (Project DrumStix from WE-DIG)

Source code checked in, #99885

Project Collection Service Accounts — Mon, 01 Oct 2012 21:24:31 GMT

Upgrade: New Version of LabDefaultTemplate.xaml. To upgrade your build definitions, please visit the following link: http://go.microsoft.com/fwlink/?LinkId=254563

Source code checked in, #99884

Project Collection Service Accounts — Mon, 01 Oct 2012 21:16:08 GMT

Checked in by server upgrade

Source code checked in, #74794

_TFSSERVICE — Tue, 03 Aug 2010 19:44:57 GMT

Checked in by server upgrade

Reviewed: GS255 0.7 CE 5.0 BSP (5 26, 2009)

GawonKim — Tue, 26 May 2009 10:45:08 GMT

Rated 5 Stars (out of 5) - ldfj;lskdfsdfasdfasdf

New Post: Gumstix Thermometer

ldadams — Sat, 07 Mar 2009 01:14:44 GMT

Any ideas where I can find a thermometer with gumstix and Windows embedded compatibility? I want to play around with making my own thermostat.

Also I would be interested in any resources that point to other compatible accessories.

Thanks

New Post: Gumstix Thermometer

ldadams — Sat, 07 Mar 2009 01:14:44 GMT

New Post: Gumstix Thermometer

ldadams — Sat, 07 Mar 2009 01:14:44 GMT

New Post: Gumstix Thermometer

ldadams — Sat, 07 Mar 2009 01:14:44 GMT

New Post: Help! need to go back to Linux

Edmond — Sat, 01 Nov 2008 10:12:17 GMT

Hi Dave,
I reformatted the rest of the flash, and everything went OK.

Slightly off topic,
What if I have a Verdex, do I use the same SRecord file? if No, then how do I go back to u-boot?

Thanks,
Ed

New Post: Help! need to go back to Linux

dvescovi — Fri, 31 Oct 2008 21:38:22 GMT

no, if you got to the JFFS2 prompt U-Boot has been re-loaded OK.

The upper memory locations of flash just are not formatted to support the linux file system.
I believe there are some commands in uboot to reformat.

DV

New Post: Help! need to go back to Linux

Edmond — Fri, 24 Oct 2008 18:31:41 GMT

Hi all,
I have Win CE 6.0 on my Basix. I used to boot from an MMC resident image.
Now I need to go back to Linux.

I followed these steps exactly:

1. Connect HyperTerminal to the FF uart port (Stuart little or other).
2. Set to 115200 N,8,1.
3. Bring up we-boot.
4. 9                          :edit memory
5. f a2000000 ffffffff 98304 :fill 98304 DWORDS (3 blocks) at address a2000000 with ffffffff (flash erased value)
6. x                          :quit
7. 6                          :select the FFUART (SRecord) as the primary download device
8. d                          :download image now
9. >A2000000                  :offset of A2000000 when added to the base address of 00000000 (examine the u-boot.srec file to verify base address, you may need different numbers here. Addresses are in the 5th - 12th character positions of the S3 records) wraps to become a destination load address of A2000000 which is the RAM buffer
10. Hit return and you should see:
Download SRecord file with offset A2000000
Waiting for SRecord file...
Error com timeout.
Waiting for SRecord file...
Select "Transfer" and "Send Text File..." from the Hyperterminal menu bar.
Select the *.* file type, browse and select the u-boot.srec file.
File should load printing "." across the screen.
When finished:
11. u                         :Unlock boot blocks (3.1 and up)
2. 9                         :edit memory
13. e 0 3                     :erase first 3 flash blocks
14. p 0 a2000000 768          :program 768 sectors (512 bytes/sector which is 3 blocks or 393216 bytes) starting at sector 0 (reset location) using buffer at a2000000
15. x                         :quit
16. r                         :reset

Unfortunately, I ended up with an error:

Scanning JFFS2 FS: . done.
find_inode failed for name=boot
load: Failed to find inode
### JFFS2 LOAD ERROR<0> for boot/uImage!
GUM>

Lately, I re-loaded we-boot over u-boot and I'm now running Win CE 6.0 image from MMC.

I suspect I made made some mistake here:
9. >A2000000 :offset of A2000000 when added to the base address of 00000000 (examine the u-boot.srec file to verify base address, you may need different numbers here. Addresses are in the 5th - 12th character positions of the S3 records) wraps to become a destination load address of A2000000 which is the RAM buffer
I did not understand this step completely. I made no changes in (u-boot_1_1_4 offset a2000000.srec) I just sent it there as is.

Any help this problem is deeply appreciated.

Best Regards,
Ed

New Post: Blcommon ERROR: -3 - SDCARD BOOT

dvescovi — Sun, 03 Aug 2008 02:16:28 GMT

You are posting to the wrong web site. Try www.codeplex.com/GumstixIII

New Post: Blcommon ERROR: -3 - SDCARD BOOT

dvescovi — Sun, 03 Aug 2008 02:16:28 GMT

You are posting to the wrong web site. Try www.codeplex.com/GumstixIII

New Post: Blcommon ERROR: -3 - SDCARD BOOT

dvescovi — Sun, 03 Aug 2008 02:16:28 GMT

You are posting to the wrong web site. Try www.codeplex.com/GumstixIII

New Post: Blcommon ERROR: -3 - SDCARD BOOT

dvescovi — Sun, 03 Aug 2008 02:16:28 GMT

You are posting to the wrong web site. Try www.codeplex.com/GumstixIII

New Post: Blcommon ERROR: -3 - SDCARD BOOT

rortega — Sat, 02 Aug 2008 15:04:34 GMT

Hello i have a verdex XM4-BT, witha a netwifimicrosd and a consolelcd-vx and a samsung LCD, so i did make the step by step for starting wince from the SD card but says nex:

Microsoft Windows CE Bootloader Common Library Version 1.4 Built Mar 12 2008 09:
16:02
Watchdog Reset
For GumstixIII Verdex Platform 1.3 Built Mar 12 2008 09:22:08
PLATFORM INFO: XM4 Verdex @416Mhz
RAM INFO:Size 67108864
FLASH INFO:Size 16646144
FLASH INFO:Bytes per blocks: 131072 Number of blocks: 127
FLASH INFO:Sectors per blocks: 256 Data bytes per sector: 512
Serial number: 01040088441E92ba
Configuring ConsoleLCD18...Configured w/USB client.
Configuring Bluetooth...Configured.
Configuring netMicro-SD...LAN9118: Chip Id 117 Revision 2
Auto Negotiation done
LAN9117 Mac = 00-12-33-55-CC-AA
Configured w/WiFi.
XM4 platform Configured!

Press [ENTER] to launch image stored on SD/MMC or [SPACE] to cancel.

Initiating image launch in 0 seconds.
Launching file resident image ...
INFO: Trying to locate/initialize MMC/SD Memory card...
INFO: Performing SD/MMC slot initialization.
INFO: No card detected.
ERROR: Failed to detect or initialize image boot device.
Blcommon ERROR: -3
Press any key to reset.

so, befor i did put the SD card on the win xp, format id and paste the NK.BIN provided for the GumstixIII_BIN SDK V1_3 on GumstixIII_BIN SDK V1_3\Image\NK.bin instalation folder.

What is happening?

Thanks for your help...

New Post: Blcommon ERROR: -3 - SDCARD BOOT

rortega — Sat, 02 Aug 2008 15:04:34 GMT

Hello i have a verdex XM4-BT, witha a netwifimicrosd and a consolelcd-vx and a samsung LCD, so i did make the step by step for starting wince from the SD card but says nex:

Press [ENTER] to launch image stored on SD/MMC or [SPACE] to cancel.

New Post: Blcommon ERROR: -3 - SDCARD BOOT

rortega — Sat, 02 Aug 2008 15:04:34 GMT

Hello i have a verdex XM4-BT, witha a netwifimicrosd and a consolelcd-vx and a samsung LCD, so i did make the step by step for starting wince from the SD card but says nex:

Press [ENTER] to launch image stored on SD/MMC or [SPACE] to cancel.

New Post: Blcommon ERROR: -3 - SDCARD BOOT

rortega — Sat, 02 Aug 2008 15:04:34 GMT

Hello i have a verdex XM4-BT, witha a netwifimicrosd and a consolelcd-vx and a samsung LCD, so i did make the step by step for starting wince from the SD card but says nex:

Press [ENTER] to launch image stored on SD/MMC or [SPACE] to cancel.

NEW POST: Alternate CE 6.0 270 BSP

vunnava — Thu, 24 Apr 2008 05:57:15 GMT

Hi All,

I just started working on Gumstix platform. I have Gumstix starter pack which includes the following.

verdex XM4,• console-vx• netmicroSD• USB gender bender• USB cable• serial null-modem cable•

I need to build the NK.BIN image instead of using the pre-built one. It would be great help to me if any one can let me know which BSP I can use for building the NK.BIN image.

Thanks and Regards,
UVK.