What am I seeing here?

May 17, 2007 at 6:00 PM
Hey Guys,
What I am seeing here in hyperTerminal?

-------------------------------------------------------------------------------------------------------------
Ethernet Boot Loader Configuration:

0) IP configuration: STATIC:192.168.0.2 MASK:255.255.255.0
1) Eth1 MAC address: 00-33-00-33-00-33
2) Eth2 MAC address: 00-00-00-00-00-00
3) Boot delay: 15 seconds
4) Hardware configuration: 0x80001259
5) Startup: Launch flash resident image
6) Primary download device: CF
7) Secondary download device: CF
8) Reset default configuration
9) Edit memory
C) Clean registry boot: NO
U) Unlock boot
R) Reset
S) Store and lock configuration/boot blocks
D) Download image now
L) Launch flash resident image now

Enter your selection: r


Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Dec 22
2006 06:04:29
Microsoft Windows CE Bootloader for the Gumstix Development Platform
WE-BOOT 3.02 Built Dec 27 2006 12:39:23
FLASH INFO:Size 16777216
FLASH INFO:Bytes per blocks: 131072 Number of blocks: 128
FLASH INFO:Sectors per blocks: 256 Data bytes per sector: 512
System Hardware: 0x80001259
Connex XM platform.
Memory clock: 99.53MHz
Run Mode clock: 398.13MHz
Turbo Mode clock: 398.13MHz
Persistent registry support enabled.
Configuring USBFN...Configured.
Configuring CF slot...Configured.
Configuring ETH1...LAN91Cxxx: Chip Id 9 Revision 2
Mac = 00-33-00-33-00-33 Configured.

Press ENTER to launch image stored in flash or SPACE to cancel.

Initiating image launch in 11 seconds.
Launching flash resident image ...
Launching flash resident image
System ready!
Preparing for download...
Coping image from Flash to RAM ...
Download successful! Jumping to image at 0x8010ABC0 (physical 0xA010ABC0)...




######################################################
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 8 2007 at 23:36:51
ProcessorType=02d0 Revision=6
spabt=ffff5000 spirq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8010ab0c
LAN91Cxxx: Chip Id 9 Revision 2
KITL: *** Device Name GUM51 ***


Microsoft Windows CE Ethernet Bootloader Com
2006 06:04:29
Microsoft Windows CE Bootloader for the Gumstix Development Platform
WE-BOOT 3.02 Built Dec 27 2006 12:39:23
FLASH INFO:Size 16777216
FLASH INFO:Bytes per blocks: 131072 Number of blocks: 128
FLASH INFO:Sectors per blocks: 256 Data bytes per sector: 512
System Hardware: 0x80001259
Connex XM platform.
Memory clock: 99.53MHz
Run Mode clock: 398.13MHz
Turbo Mode clock: 398.13MHz
Persistent registry support enabled.
Configuring USBFN...Configured.
Configuring CF slot...Configured.
Configuring ETH1...LAN91Cxxx: Chip Id 9 Revision 2
Mac = 00-33-00-33-00-33 Configured.

Press ENTER to launch image stored in flash or SPACE to cancel.

Initiating image launch in 0 seconds.
Launching flash resident image ...
Launching flash resident image
System ready!
Preparing for download...
Coping image from Flash to RAM ...
Download successful! Jumping to image at 0x8010ABC0 (physical 0xA010ABC0)...




######################################################
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 8 2007 at 23:36:51
ProcessorType=02d0 Revision=6
spabt=ffff5000 spirq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 8010ab0c
LAN91Cxxx: Chip Id 9 Revision 2
KITL: *** Device Name GUM51 ***

---------------------------------------------------------------------------------------------------------------

1. I loaded the NK.bin via ethernet into the flash.
2. I loaded the same file via CF this time.

Am I missing something here?
May 17, 2007 at 8:52 PM
Are you trying to run off the flash or a CF? Check option 5 to make sure it is set to what you are trying to accomplish. My two cents...




0) IP configuration: STATIC:192.168.0.2 MASK:255.255.255.0
1) Eth1 MAC address: 00-33-00-33-00-33
2) Eth2 MAC address: 00-00-00-00-00-00
3) Boot delay: 15 seconds
4) Hardware configuration: 0x80001259
5) Startup: Launch flash resident image
6) Primary download device: CF
7) Secondary download device: CF
8) Reset default configuration
9) Edit memory
C) Clean registry boot: NO
U) Unlock boot
R) Reset
S) Store and lock configuration/boot blocks
D) Download image now
L) Launch flash resident image now